€0.85
Accueil
Trending
€1.37
€115.00
€3.38
Banner
Dental bur
There are 61 products.
Pink Resista strawberry (731)
Refined corundum cutter for universal work on metals and chrome-cobalt alloys. Diameter 6.5 mm – Head length 13 mm
€8.00
Pink Resista strawberry (732)
Refined corundum for universal work on metals and chrome-cobalt alloys. Diameter 5 mm – Head length 12.5 mm
€8.00
Pink Resista strawberry (733)
Refined corundum for universal work on metals and chrome-cobalt alloys. Diameter 3.5 mm – Head length 10.5 mm
€8.00
Cutting discs (25/0.6) - Résista (Box of 100pcs)
Diameter 25/0.6 Box of 100 pieces
€18.00
5455-060HP Carbide cutter - 55 teeth
Super brush cross teeth Using this cutter, smooth surfaces are achieved very quickly on all resins. DIAM 060 - 1/10MM
€19.00
5420-060HP VOLCANO milling cutter - 20 teeth
Fine cross teeth Suitable for all dental materials. Allows you to create a smooth surface and allows the precise creation of any surface structure. ROUNDED END CYLINDER - DIAM 60 - 1/10 MM
€23.00
5410-060HP Carbide cutter - 10 teeth
Standard cross teeth Suitable for primary machining of all Dental materials. For machining large surfaces without tearing off the material.
€22.50
5453-060HP Carbide cutter - 53 teeth
Coarse fine teeth For working with resin prostheses. The fine and coarse toothed cutter is specially designed for working with resin prostheses, is easy to use, does not stick and allows you to obtain smooth surfaces.
€23.00
5486-060HP Carbide cutter - 86 teeth
Safety teeth For processing plaster models. Phase cutting ensures high material removal and a smooth surface. The counter-clockwise teeth allow safe processing so that the cutter shank does not come out of the collet. DIAM 060 - 1/10MM
€23.00
5331HP Flame mass diamond bur (super coarse grain)
Very coarse grain by sintering, for ceramic precious materials and cobalt chrome. 050 - 1/10MM
€36.00
5332HP Diamond milling cutter with rounded tip (super coarse grain)
Very large grain by sintering, for ceramic precious materials and cobalt chrome 050 - 1/10 MM
€36.00
6925-040HP Carbide cutter - 25 teeth
Helical teeth Allows you to machine high hardness materials: Titanium, non-precious metals such as cobalt and sealed chromes Composite stone plaster ties Resin for denture Alloy, titanium, precious metals, hard plasters Ø 040- 1/10MM
€19.00
7006-220UM 10x separating disc - reinforced fiber
These discs are flexible while maintaining cutting power and long life Disc suitable for precious and non-precious metals section Releases little dust No heating of materials Disc thickness: 0.2mmDiameter: 22mmSet of 10
€26.00
7007-400UM 10x separating disc - reinforced fiber
These discs are flexible while maintaining cutting power and long life Disc suitable for precious and non-precious metals section Releases little dust No heating of materials Disc thickness: 0.5mmDiameter: 40mmSet of 10
€28.00
7008-400UM 10x separating disc - reinforced fiber
These discs are flexible while maintaining cutting power and long life Disc suitable for precious and non-precious metals section Releases little dust No heating of materials Disc thickness: 1mmDiameter: 40mmSet of 10
€30.00
7275-060HP Carbide cutter - 75 teeth
Single tooth with transverse cut Carbide cutter - 75 teeth For the production of soft acrylics / soft irons Ø 060 - 1/10MM - GREEN
€23.00
€38.00
€45.50
Superflex diamond blade 355.514.190HP
Shipping within 3 days
€16.00
Exa dental unmounted black
Sold by 100.
€48.00
Diamond cutting disc
diam. ISO 450. disc to separate.
€56.00
€56.00
€12.00
CeraPro Cylindrical Ceramic Burr 8001.050HP
Suitable for machining extended buccal and palatino-lingual surfaces Diam.050 (1/10mm) Special zirconia
€22.00
Made of ceramic CeraPro Flat tip cone 8002.040HP
Suitable for machining extended buccal and palatino-lingual surfaces Diam.040 (1/10mm) Special zirconia
€22.00
Ceramic Burr CeraPro Wheel 8003.150HP
Suitable for machining extended buccal and palatino-lingual surfaces Diam.150 (1/10mm) - Standard diamond grain. - Abrasive wheel with natural diamond particles - Creation of contours - Roughing without heating
€24.00
Superflex 355.504.190HP
In very fine, fine and standard diamond grit, in very fine for separating precisely, in fine and standard for pre-separating and roughing ceramics. Shipping within 3 days
€17.50
Superflex 355.504.220HP
In very fine, fine and standard diamond grit, in very fine for separating precisely, in fine and standard for pre-separating and roughing ceramics. Shipping within 3 days
€18.50
Superflex cutting disc 355.524.190HP
SUPERFLEX marginal surface diamond disc, allows pre-separating and roughing ceramics. 190 - 1/10MM
€15.90
Superflex cutting disc 355.524.220HP
SUPERFLEX marginal surface diamond disc, allows pre-separating and roughing ceramics. 220 - 1/10MM
€16.50
“Flex” Diamond Disc 365,524,300HP
Diamond disc designed to separate plaster. The notched disc allows faster and guided cutting. Thanks to disk segmentation, dust evacuation is more efficient and thus prevents disk blockage. 300 - 1/10 MM
€37.00
“Flex” Diamond Disc 365,524,450 HP
Diamond disc designed to separate plaster. The notched disc allows faster and guided cutting. Thanks to disk segmentation, dust evacuation is more efficient and thus prevents disk blockage. 450 - 1/10MM
€54.90
Hollow Diamond Bur 490.104.110
The grain guarantees very extensive resin removal. Pre-grinding of prosthetic and orthodontic resins, processing of individual impression trays and flexible base plates. 110 - 1/10 MM
€44.00
Rubynit strawberry
Ruby abrasives: in standard and fine grain, with a metallic bond, for working with resins. Ruby cutters allow precise, heat-free modeling of acrylics for prosthetics. Ruby abrasives are also recommended for adjustments on soft resins.
€9.80
€11.98
Diamond Grinder 4896A.104.080
The special diamond grain guarantees very extensive resin removal with greater shrinkage and less heat development for optimal surface quality.
€39.00
Diamond Grinder 5896.104.080
The special diamond grain guarantees very extensive resin removal with greater shrinkage and less heat development for optimal surface quality.
€31.70
DUO DIACRYLIC Grinder DDG 860.104.085
Pre-grinding of resins. Specially grooved diamond grain for better chip evacuation. Guarantees optimal resin removal and lower heat development. 085 - 1/10 MM
€39.00
Diamond bur in flame mass (standard grain)
Carbide-bonded sintered diamond instrument for optimal shaping of ceramics and NP alloys.
€45.50
Diamond cutter in cylinder mass with rounded tip (standard grain)
Carbide-bonded sintered diamond instrument for optimal shaping of ceramics and NP alloys.
€45.50
Diamond burr in the mass cone with rounded tip (coarse grain)
Carbide-bonded sintered diamond instrument for optimal shaping of ceramics and NP alloys.
€45.50
Cutting discs (38/1) - Résista (Box of 100pcs)
Diameter 38/1 Box of 100 pieces
€36.00
CAD/CAM tungsten carbide milling cutter 0730.023HP
Work before sintering of unsintered Zirconia restoration / sintering for coloring. Precision machining of all alloys and composites. Ideal for ceramics, works without vibrations, so these cutters give a higher quality result in the surface condition than with diamond instruments. Superfine cross teeth. CONE - Ø 23 - 1/10MM
€16.50
CAD/CAM tungsten carbide milling cutter 0830.023HP
Work before sintering of unsintered Zirconia restoration / sintering for coloring. Precision machining of all alloys and composites. Ideal for ceramics, works without vibrations, so these cutters give a higher quality result in the surface condition than with diamond instruments. ROUNDED END CYLINDER - Ø 23 - 1/10MM
€16.50
CAD/CAM tungsten carbide milling cutter 1130.023HP
Work before sintering of unsintered Zirconia restoration / sintering for coloring. Precision machining of all alloys and composites. Ideal for ceramics, works without vibrations, so these cutters give a higher quality result in the surface condition than with diamond instruments. Superfine cross teeth. ROUNDED END CYLINDER - Ø 23 - 1/10MM
€16.50
CAD/CAM 5630.045HP tungsten carbide milling cutter
Work before sintering of unsintered Zirconia restoration / sintering for coloring. Precision machining of all alloys and composites. Ideal for ceramics, works without vibrations, so these cutters give a higher quality result in the surface condition than with diamond instruments. Superfine cross teeth. ROUNDED END CONE Ø 45 - 1/10MM
€23.50
Diamond cutting disc 378.524.450HP
Fully diamond cutting disc on both sides for separating and cutting pressing molds. With segmentation to avoid blocking or hanging of the disk. 450 - 1/10MM
€55.00
MultiCut diamond blade 354.524.220HP
Universal diamond blade with multi-layered marginal diamond grain, galvano-infiltrated for long life and highest cutting capacity. High durability. High flexibility and stability of disks.
€61.50
Cylindrical cutter with chamfered teeth
Cylindrical cutter with chamfered teeth and rounded end
€28.50
Chuck for discs 303/050 4001HP
Disc chuck, 303/050, PM shank, stainless steel
€11.90
Chuck for discs 305 RF/050 4007HP
Disc chuck, 305 RF/050, reinforced PM shank, stainless steel
€11.90
Chuck for discs 305 RF/050 4005RA
Disc chuck, 305 RF/050, CA shank, stainless steel
€12.50
Special chuck for left-handed people
Special chuck for left-handed people, stainless steel
€14.50
Chuck for discs 303 RF/050 4009HP
Disc chuck, 303 RF/050, PM shank diam. 3mm, stainless steel
€12.50
Chuck for discs 305/080 4029HP
Disc chuck, 305/080, reinforced PM shank, stainless steel
€26.50
CHUCKS for 4004HP polishers
Stainless steel for polishers.
€6.80
Threaded chuck for 301L 4008HP cylinders
Threaded cylinder chuck 301L, PM shank, special steel, nickel-plated
€6.80
Threaded chuck for 310G 4017HP cylinders
Threaded chuck for cylinders 310G, stainless steel
€6.80
Chuck for discs 305 4021HP
Disc chuck 305, PM shank, with reinforcement flanges
€18.50
5520-060HP VOLCANO milling cutter - 20 teeth
Fine cross teeth Suitable for all dental materials. Allows you to create a smooth surface and allows the precise creation of any surface structure. ROUNDED END CONE - DIAM 60 - 1/10 MM
€23.00
5886-060HP Carbide cutter - 86 teeth
Safety teeth For processing plaster models. Phase cutting ensures high material removal and a smooth surface. The counter-clockwise teeth allow safe processing so that the cutter shank does not come out of the collet.DIAM 060 - 1/10MM
€23.00