€0.85
Best sellers
There are 96 products.
Pink sticky wax
Sticky wax stick ø 7 mm and length 15 cm. Intended for fixing the resin tooth to the matrix and the matrix to the model. Connects the base plates and the occlusion rims. Holds perfectly thanks to the high adhesion. Very fast hardening. Very rich in beeswax. Melting temperature 59 to 63°C. BOX OF 24 STICKS
€36.00
Chuck for discs 305 RF/050 4007HP
Disc chuck, 305 RF/050, reinforced PM shank, stainless steel
€11.90
Diamond cutting disc 378.524.450HP
Fully diamond cutting disc on both sides for separating and cutting pressing molds. With segmentation to avoid blocking or hanging of the disk. 450 - 1/10MM
€55.00
DenturDUPLIX Shore 22 FAST (5Kg+5Kg)
Duplication silicone by addition for plaster, resin and metal (unmolding time 15 min) Base + catalyst 5kg + 5kg PRODUCT APPROVED BY OUR LABORATORIES
€240.00
Exa Technique – Yellow – Fine grain for polishing 0656HP
Silicone polishers for optimal smoothing and densification of the material surface. Allows shine without polishing paste Fine grain to prepare for polishing Max. rotation speed. : 10,000 - 15,000 rpm Allows shine without polishing paste.
€17.00
StarGloss ceramic polish – Coarse grit R1020HP
Wheel. 3-step diamond polishing system for finishing, polishing and brightening. Maximum rotation speed: 15000 to 20000 rpm. WHEEL - HEAD LENGTH 2.5MM 1/10MM: 170
€41.50
Diamond Grinder 4896A.104.080
The special diamond grain guarantees very extensive resin removal with greater shrinkage and less heat development for optimal surface quality.
€39.00
SoftBrush Medium - Edenta
Optimally replaces corundum strips for finishing thermoplastic materials. Open-pore brush heads reduce the risk of overheating the prosthetic part; which prevents any deformation of the materials. Sold by 5.
€12.80
Superflex cutting disc 355.524.190HP
SUPERFLEX marginal surface diamond disc, allows pre-separating and roughing ceramics. 190 - 1/10MM
€15.90
Superflex 355.504.220HP
In very fine, fine and standard diamond grit, in very fine for separating precisely, in fine and standard for pre-separating and roughing ceramics. Shipping within 3 days
€18.50
CeraPro Cylindrical Ceramic Burr 8001.050HP
Suitable for machining extended buccal and palatino-lingual surfaces Diam.050 (1/10mm) Special zirconia
€22.00
7008-400UM 10x separating disc - reinforced fiber
These discs are flexible while maintaining cutting power and long life Disc suitable for precious and non-precious metals section Releases little dust No heating of materials Disc thickness: 1mmDiameter: 40mmSet of 10
€30.00
7006-220UM 10x separating disc - reinforced fiber
These discs are flexible while maintaining cutting power and long life Disc suitable for precious and non-precious metals section Releases little dust No heating of materials Disc thickness: 0.2mmDiameter: 22mmSet of 10
€26.00
6925-040HP Carbide cutter - 25 teeth
Helical teeth Allows you to machine high hardness materials: Titanium, non-precious metals such as cobalt and sealed chromes Composite stone plaster ties Resin for denture Alloy, titanium, precious metals, hard plasters Ø 040- 1/10MM
€19.00
5332HP Diamond milling cutter with rounded tip (super coarse grain)
Very large grain by sintering, for ceramic precious materials and cobalt chrome 050 - 1/10 MM
€36.00
5420-060HP VOLCANO milling cutter - 20 teeth
Fine cross teeth Suitable for all dental materials. Allows you to create a smooth surface and allows the precise creation of any surface structure. ROUNDED END CYLINDER - DIAM 60 - 1/10 MM
€23.00
Fixed Metal KERA C
Alloy for fixed, Ceramic bonding non-precious cobalt-based alloy dental mold TYPE 5. CoCr alloy for universal requirements. Indications: Crown and bridge, telescopic crowns, combined restorations, attachment work. Packaging: 1KG
€215.00
Pink Resista strawberry (731)
Refined corundum cutter for universal work on metals and chrome-cobalt alloys. Diameter 6.5 mm – Head length 13 mm
€8.00
CAD CAM MORSA DENTAL wax disc
CAD/CAM machining discs in polyethylene wax. For the production of crowns and bridges for the casting, pressing and overpressing technique.
€20.00
Soft Brush Denturaix
Optimally replaces corundum strips for finishing thermoplastic materials. Open-pore brush heads reduce the risk of overheating the prosthetic part, which helps prevent any deformation of the materials. PRODUCT APPROVED BY OUR LABORATORIES
€11.50
Ultima natural pumice
BOX OF 20 KG
€100.00
Dentur Ortho Plus
Ortho resin for orthodontic devices, orthodontic mouths, assorted liquid monomer and extrafine micro powder, very low shrinkage. Powder + liquid: €110.00 incl. tax Powder: €80.00 including tax per kilo Liquid: €40.00 including tax for 500 ml PRODUCT APPROVED BY OUR LABORATORIES
€40.00
Wax Stick GEBDI
Flavored wax stick, dimensions: 100 x 10 x 10 mm cardboard dimensions 175 x 80 x 4 mm available in 3 distinct stiffnesses Ref. 63200 YELLOW (LEMON) - SOFT Ref. 63500 GREEN (APPLE) - MEDIUM Ref. 63800 RED (STRAWBERRY) - HARD BOX OF 1850 G
€49.00
Chuck for discs 305/080 4029HP
Disc chuck, 305/080, reinforced PM shank, stainless steel
€26.50
CAD/CAM tungsten carbide milling cutter 0830.023HP
Work before sintering of unsintered Zirconia restoration / sintering for coloring. Precision machining of all alloys and composites. Ideal for ceramics, works without vibrations, so these cutters give a higher quality result in the surface condition than with diamond instruments. ROUNDED END CYLINDER - Ø 23 - 1/10MM
€16.50
Cutting discs (38/1) - Résista (Box of 100pcs)
Diameter 38/1 Box of 100 pieces
€36.00
Toff resin brush 3 rows 60mm (x12)
White brush in plastic center, chingking bristles, advantages: also allows for shine, diameter 60 White brush 3 rows 60mm Blue plastic core brush Advantage: allows you to shine Brand: Toff Sold by 12
€19.00
POLISHER Exa Technique – Gray – Medium grain 0667HP
Silicone polishers for smoothing and densifying the surface of the material. Create a slight shine. To prepare the gloss. Medium grit to prepare for polishing Max rotation speed : 10,000 - 15,000 rpm Makes a light shine to prepare for the shine
€17.00
StarTec Ceramic Polish – Super Fine Grit ST1540HP
2-step diamond polisher for careful work on vitreous lithium disilicate ceramics, vitreous ceramics, silicate ceramics, feldspathic ceramics and leucite ceramics. LENS - HEAD LENGTH 2 MM 1/10MM: 260
€42.20
StarTec Ceramic Polish – Medium Grit ST1030HP
2-step diamond polisher for careful work on vitreous lithium disilicate ceramics, vitreous ceramics, silicate ceramics, feldspathic ceramics and leucite ceramics. WHEEL - HEAD LENGTH 2.5MM 1/10MM: 170
€41.50
Diamond cutter in cylinder mass with rounded tip (standard grain)
Carbide-bonded sintered diamond instrument for optimal shaping of ceramics and NP alloys.
€45.50
Rubynit strawberry
Ruby abrasives: in standard and fine grain, with a metallic bond, for working with resins. Ruby cutters allow precise, heat-free modeling of acrylics for prosthetics. Ruby abrasives are also recommended for adjustments on soft resins.
€9.80
€11.98
SoftBrush Wholesale - Edenta
Optimally replaces corundum strips for finishing thermoplastic materials. Open-pore brush heads reduce the risk of overheating the prosthetic part; which prevents any deformation of the materials. Sold by 5.
€12.80
“Flex” Diamond Disc 365,524,300HP
Diamond disc designed to separate plaster. The notched disc allows faster and guided cutting. Thanks to disk segmentation, dust evacuation is more efficient and thus prevents disk blockage. 300 - 1/10 MM
€37.00
Metal Stellite DENTIUM
Alloy for stellite. Non-precious metals based on cobalt TYPE 5. Stable pattern casting alloy for delicate structures. Indications: Complex Transverse Bands, Implant Bars, Fixation Works PRODUCT APPROVED BY OUR LABORATORIES Packaging: 1kg
€195.00
Anutex Kemdent modeling wax plates (2.5kg)
High quality modeling wax. The primary softening temperature is generally: 35°C - 41°C. ISO Type 1 soft classification. 187mm x 88mm x 1.5mm thick BOX OF 2.5 KG
€56.00